G.L. Engineering   - - -  Cad Design +         
            "CLOUD BUSTER"  

 
                       
HOME                 DISCLAIMER



WHAT IS A CLOUD BUSTER:

By siphoning orgone energy either away from clouds or directing it into clouds, you could dissolve or build up clouds-at will..

Cloud buster use a series of 1 to 12 very long tubes are mounted parallel to each other and held attached to a tripod with a full turret swivel. The entire tube assembly can also be pivoted from horizontal to full vertical. Some sort of 'resonant tuning box' is connected to the rear end of the tubes and a very long flexible pipe is also connected from the end of the tubes and trailed into the sea water. By pointing the Cloud Buster at a cloud, you could draw off its orgone energy and direct it into the tubes and then into the water, for which it has a very strong affinity.

Wilhelm Reich’s cloudbuster actually works to channel subtle orgone energy into it, like a vacuum. When it is pointed at a sky full of clouds, the energy charge that was holding together the surface tension of the water in the cloud dissipates, causing the cloud to evaporate. No surface tension, no clouds – hence, the cloud is busted.

The device itself is constructed with hollow metal tubes, set on a gun mount so that they can be aimed at the sky. According to Reich, it must be connected through a grounding rod to a living source of water beneath the ground. An active well, or other source of “healthy” flowing water is needed for the cloud buster to work. Stagnant water will not conduct the proper energy flow, as the orgone from the living water plays a critical role in the equation.

Elehos kerou 002 ENGcloud buster

 

 
   CADDESIGN+  does not have any warranty stated & it is the responsibility of the builder to have all liability for the
   building safety & operation of the machine.
 We are not responsible for any misprint errors
 that may occur.   
  All Right Reserved  
CDP-backhoeŽ2002-2024